A3D T-Nuts Flex Stoppers

T-Nuts Flex stoppers keep the T-nuts permanently in place in your board's foil track (US box) at the correct spacing. The nuts don't get lost, and mounting the mast is faster because you don't need to position the nuts every time.

Features

• Holds the T-nuts in the track at the correct screw spacing
• Flexible construction withstands bending and is easy to install
• Sold as a pair, with 4 brass T-nuts included

Construction

• Flexible plastic body
• Brass T-nuts
• Designed and made in France

Specifications

• Screw spacing: 16 cm
• Nuts: M8
• Weight: 50 g
• Not suitable for tracks less than 5 mm high

Who it's for

Foilers who remove the mast often and want a faster, more secure setup. We have tested the 16 cm spacing and found it works with Code Foils masts. According to the manufacturer's chart, 16 cm spacing is also used by e.g. F-One and some Gong masts. If you're unsure about your foil, measure the distance between your mast's front and rear screws and check the nut size before ordering. Other sizes are also available – ask us at info@foilingshop.com!